Recommended UseVarnish epoxy is a two component coating. This product is based on epoxy resin and polyamide hardener for decorative and portative purposed. This varnish has high gloss & adhesion. It has high resistance in unsuitable condition Varnish can be used as a protector and coverage creative on wood surfaces, furniture, packets, brick – made, concrete & steel surfaces
Surface Preparation-The surface should be free form any rust, moisture, mill scale, oil & grease - Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life - Apply the paint immediately followed by surface preparation .
Application procedure- Flush equipment with recommended cleaner before use - Stir component A (base) with a Power Mixer. - Add hardener to base in the proper Mixing continue stirring for 5-10 Minutes. - After 20 – 30 minutes add Shakiba’s thinner for ready to use - Use Shakiba’s thinner for adjusting the viscosity. -The consumption depends on temperature & type of equipment & thickness paint
Safety- This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.
Note- Pot life, drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. -This information given 25°C temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert.