Acrylic (emulsion) Paint

  • Catalog Download

  • Recommended Use

    This paint is a ‘one component’ paint base on acrylic emulsion resin which its film wereformed by evaporation. After film formation it has good adhesion and appearance and resistance against scratch, moisture atmospheric condition. This product applied on cementand plaster as decorative and protective coating. Its drying time is really short and it can bewashed easily.
  • Surface Preparation

    •The surface should be free from any rust, moisture, mill scale, oil and grease • Mechanical and chemical surface preparation methods should be performed depending on the type of contamination, the coating system environmental condition and service life. • Apply the paint immediately followed by
  • Application Procedure

    • Flush equipment with cleaner before use • Stir paint with a power mixer • Use water for adjusting the viscosity • The thinner should be added gradually • The consumption depends on temperature and type of equipment and thickness paint • Clean all equipment with water
  • Safety

    -This product is flammable it must be kept away from heat, flash & flame -keep container closed use with adequate ventilation & Earth -Prolonged & repeated contact with skin may be harmful -In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      -Density , solid contents theoretical coverage are dependent on color -Pot life, drying time is dependent on air and steel temperature, applied film thickness. -Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. For better adhesion on un steel, we offer wash primer as on under. -This information given 25°C temperatureand changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to saleengineering expert.

Facade paint, based on pure Acrylic (Matt)

  • Catalog Download

  • Recommended Use

    This paint is used for fast, beautiful and durable painting of interior and exterior surfaces (plaster, cement, brick, cementcomposition panels, wood, etc). This paint with high quality has a good resistance against abrasion and washing, with good stability to sunlight, water and alkali materials permeation. Therefore it is recommended for exterior surfaces, especially exteriordecoration of buildings. Fast drying time, ease of application and environmentally friendly, are the other advantages of this paint.
  • HOW TO USE

    1-Clean the surface with water. In order to remove dust ( Brush must be used for cleaning the surface's mineral salts ) also the surface must be cleaned from any dust and grease , evenold paints , till achieving a suitablesurface . For cleaning cement surfaces use Water Jet method. Be sure about complete drying of surface. 2-Before applying the paint using special sealer for facade paint (ALCO-3306) is recommended .This sealer by having high permeation to surface's cracks and filling the pores and by having high absorbing ability in addition to create better adhesion for applying paint, also increase's coverage and durability of paint. This sealer is suggested for absorber surfaces such as plaster, concrete, brick, cement composition panels. 3-Dilute Kamel Rang Shakiba Acrylic Latex paint with proper amount of water, and then apply on the surface. Dilution ratio of paint with water depends on environment’s temperature, surface and also painting tools. But in normal painting conditions, dilution ratio of paint with water is based on weight percentage, with brush 40%, with roller 30% and with paint gun 60%. 4-The proper temperature for applying paint is 10-35º C and interval time between applying layers is 3 hours. 5-In order to increasing life time and durability of facade paint and creating a surface with more glossiness or matt and more beautiful aspect, applying one layer of Acrylic waterbase lacquer (ALCO-3112,3113,3114) on the facade paint , is recommended . Applying these lacquers, according to amount of glossiness can be defined.
  • RECOMMENDATIONS

    1-Stir the content well before use. 2-Spraying is suggested. 3-Before applying the paint, it is recommended to use special sealer for facade paint (ALCO-3306). 4-In order to increase life timeand durability of facade paint and creating a surface with more beautiful aspect, it's recommended to use a layer of Kamel Rang Shakiba water base lacquer as final layer.
  • HOW TO CLEAN TOOLS

    Remove the spillage of substance with soap and warm water immediately. Also after use, wash your hands and painting tools with warm water and soap. For preventing corrosion of painting tools and equipments, wash them with white spirit and dry themimmediately.
  • SAFETY POINTS

      Keep the paint canin dry and cool place, far from the direct sunlight. Keep the can closed after use. Prevent paint from freezing. It is recommended to use this productbefore the expire date (maximum 6 months). Sanding or scraping the old Alkyd painted surface can cause poisonous lead dust. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure of lead or other hazardous substances requires the use of proper protective equipment, such as proper fitted respirator(NIOSH approved) and proper containments .Finally, clean up your working area

Facade paint based on Pure Acrylic (Gloss)

  • Catalog Download

  • Recommended Use

    This paint is used for fast, beautiful and durable painting of interior and exterior surfaces (plaster, cement, brick, cementcomposition panels, wood, etc). This paint with higher quality has a good resistance to abrasion and washing, it also has a good stability to sunlight, water and alkali materials permeation. Therefore it is recommended for exterior surfaces, especially exteriordecorationof buildings. Fast drying time, ease of application and environmentally friendly, are the other advantages of this paint. ALCO-3105 makes a beautiful and gloss film on the surface.
  • HOW TO USE

    1-Clean the surface with water, in order to remove dust (Brush must be use for cleaning the surface's mineral salts) also the surface must be clean from any dust and grease, even old paints, till achieving a suitable surface. For cleaning cement surfaces use Water Jet method. Be sure about complete drying of surface. 2-Before applying the paint using special sealer for facade paint (ALCO-3306) is recommended .This sealer by having high permeation to surface's cracks and filling the pores and by having high absorbing ability in addition to create better adhesion for applying paint, also increases coverage and durability of paint. This sealer is suggested for absorbent surfaces such as plaster, concrete, brick, cementcomposition panels. 3-Dilute Kamel Rang Shakiba Acrylic Latex paint with proper amount of water, and then apply on the surface. Dilution ratio of paint with water depends on environment temperature, surface and also painting tools. But in normal paintingconditions, dilution ratio of paint with water is based on weight percentage, with brush: 40%, with roller: 30% and with paint gun: 60%. 4-The proper temperature for applying paint is 10-35º C and interval time between applying layers is 3 hours. 5-In order to increasing life time and durability of facade paint and so ,creating a surface with higher gloss and more attractive aspect , applying one layer of gloss acrylic water base lacquer(ALCO-3112) is recommended.
  • RECOMMENDATIONS

    1-Stir the content well before use. 2-Spraying is suggested. 3-Before applying the paint, it is recommended to use special sealer for facade paint (ALCO-3306) . 4-It's recommended to use two layers of KAMEL RANG SHAKIBA’s sealer before applying the paint.
  • HOW TO CLEAN TOOLS

    Remove the spillage of substance with soap and warm water immediately. Also after use, wash your hands and painting tools with warm water and soap. For preventing corrosion of painting tools and equipments, wash them with white spirit and dry themimmediately.
  • SAFETY POINTS

      Keep the paint can in dry and cool place, far from the direct sunlight. Keep the can closed after use. Prevent paint from freezing. It is recommended to use this productbefore theexpire date (maximum 6 months). Sanding or scraping the old Alkyd painted surface can cause poisonous lead dust. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure of lead or other hazardous substances requires the use of proper protective equipment, such as proper fitted respirator(NIOSH approved) and proper containments .Finally, clean up your working area.