Epoxy Concrete Primer (anti-static)

  • Catalog Download

  • Recommended Use

    It is a two component primer base on epoxy resin. It is generally applied before applying antistatic flooring to fill porosity and narrow cracks and to prevent wasting paint. It can be applied in several layers, depending on penetration of surface. This can
  • Surface Preparation

    •The surface should be free from any rust, moisture, mill scale, oil and grease • Mechanical and chemical surface preparation methods should be performed depending on the type of contamination, the coating system environmental condition and service life. • Apply the primer immediately followed by surface preparation.
  • Application procedure

    • Flush equipment with cleaner before use • Stir two components with a power mixer. Notice pot life time and mixing ratio • Use Shakiba`s thinner for adjusting the viscosity • The thinner should be added gradually • The consumption depends on temperature and type of equipment and thickness paint • Clean all equipment with Shakiba`s thinner
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      - Density , solid contents theoretical coverage are dependent on color - Pot life, drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. For better adhesion on un steel, we offer wash primer as on under. -This information given 25°C temperature and changed temperature cause to change data.

Epoxy Concrete Primer

  • Catalog Download

  • Recommended Use

    It is a two component primer base on epoxy resin. It is generally without any pigment to fill porosity and narrow cracks and to prevent wasting paint. It can be applied in several layers, depending on penetration of surface. This can be applied on different kind surfaces such as cement, plaster, and etc.
  • Surface Preparation

    • The surface should be free from any rust, moisture, mill scale, oil and grease • Mechanical and chemical surface preparation methods should be performed depending on the type of contamination, the coating system environmental condition and service life. • Apply the primer immediately followed by surface preparation .
  • Application procedure

    • Flush equipment with cleaner before use • Stir two components with a power mixer. Notice pot life time and mixing ratio • Use Shakiba`s thinner for adjusting the viscosity • The thinner should be added gradually • The consumption depends on temperature and type of equipment and thickness paint • Clean all equipment with Shakiba`s thinner .
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      - Density , solid contents theoretical coverage are dependent on color - Pot life, drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. For better adhesion on un steel, we offer wash primer as on under. -This information given 25°C temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it.

Epoxy Flooring (anti-static)

  • Catalog Download

  • Recommended Use

    It is a two component primer base on epoxy resin and polyamine as a hardener. It is generally applied in hospitals, sport stadiums, workrooms, and factories to protect its cemented or concrete surfaces against water, oils, acids, alkalis, and other chemicals. This product makes the floor free from any dust and gives it good appearance.
  • Surface Preparation

    • The surface should be free from any rust, moisture, mill scale, oil and grease • Mechanical and chemical surface preparation methods should be performed depending on the type of contamination, the coating system environmental condition and service life. • Apply the epoxy flooring immediately followed by surface preparation.
  • Application procedure

    • Flush equipment with cleaner before use • Stir two components with a power mixer. Notice pot life time and mixing ratio • Use Shakiba`s thinner for adjusting the viscosity • The thinner should be added gradually • The consumption depends on temperature and type of equipment and thickness paint • Clean all equipment with Shakiba`s thinner
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      - Density , solid contents theoretical coverage are dependent on color - Pot life, drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. For better adhesion on un steel, we offer wash primer as on under. -This information given 25°C temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert.

Epoxy Flooring

  • Catalog Download

  • Recommended Use

    It is a two component primer base on epoxy resin and polyamine as a hardener. It is generally applied in hospitals, sport stadiums, workrooms, and factories to protect its cemented or concrete surfaces against water, oils, acids, alkalis, and other chemicals
  • Surface Preparation

    •The surface should be free from any rust, moisture, mill scale, oil and grease • Mechanical and chemical surface preparation methods should be performed depending on the type of contamination, the coating system environmental condition and service life. • Apply the epoxy flooring immediately followed by surface preparation.
  • Application procedure

    • Flush equipment with cleaner before use • Stir two components with a power mixer. Notice pot life time and mixing ratio • Use Shakiba`s thinner for adjusting the viscosity • The thinner should be added gradually • The consumption depends on temperature and type of equipment and thickness paint • Clean all equipment with Shakiba`s thinner
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      - Density , solid contents theoretical coverage are dependent on color - Pot life, drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. For better adhesion on un steel, we offer wash primer as on under. -This information given 25°C temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert. -For more information, please call to sale engineering expert.

Varnish Epoxy

  • Catalog Download

  • Recommended Use

    Varnish epoxy is a two component coating. This product is based on epoxy resin and polyamide hardener for decorative and portative purposed. This varnish has high gloss & adhesion. It has high resistance in unsuitable condition Varnish can be used as a protector and coverage creative on wood surfaces, furniture, packets, brick – made, concrete & steel surfaces
  • Surface Preparation

    -The surface should be free form any rust, moisture, mill scale, oil & grease - Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life - Apply the paint immediately followed by surface preparation .
  • Application procedure

    - Flush equipment with recommended cleaner before use - Stir component A (base) with a Power Mixer. - Add hardener to base in the proper Mixing continue stirring for 5-10 Minutes. - After 20 – 30 minutes add Shakiba’s thinner for ready to use - Use Shakiba’s thinner for adjusting  the viscosity. -The consumption depends on temperature & type of equipment & thickness paint
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      - Pot life, drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. -This information given 25°C temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert.