Intermediate Alkyd Paint

  • Catalog Download

  • Recommended Use

    This product is base on alkyd resin and one component coating. It is generally u sed as second layer to improve adhesion of top coat and increase protection of the whole system. It is recommended for normal and semi-industrial environments. It is used as second layer on different kinds of machineries, steel structures, appliance, and etc.
  • Surface Preparation

    • The surface should be free from any rust, moisture, mill scale, oil and grease. • If the surface is smooth, it should rub by sand paper. • Mechanical and chemical surface preparation methods should be performed depending on the type of contamination, the coating system, environmental condition and service life. • The damaged area of primer and subsequent layer should repair. • Apply the paint immediately followed by surface preparation.
  • Application Procedure

    • Flush equipment with cleaner before use • Stir two components with a power mixer. Notice pot life time and mixing ratio • Use Shakiba`s thinner for adjusting the viscosity • The thinner should be added gradually • The consumption depends on temperature and type of equipment and thickness paint • Clean all equipment with Shakiba`s thinner
  • Safety

    -This product is flammable it must be kept away from heat, flash & flame -keep container closed use with adequate ventilation & Earth -Prolonged & repeated contact with skin may be harmful -In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      -Density , solid contents theoretical coverage are dependent on color -Pot life, drying time is dependent on air and steel temperature, applied film thickness. -Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. For better adhesion on un steel, we offer wash primer as on under. -This information given 25°C temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert.

medium alkyd aluminum

  • Catalog Download

  • Recommended Use

    Industrial alkyd mid coat is a one component coating . This product as general purpose rust preventing mid coat for alkyd system. This paint is recommended for exterior & interior surfaces of building , steel structures and semi industrial environments, also used for industrial machines.
  • Surface Preparation

    The surface should be free form any rust, moisture, mill scale, oil & grease -Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life -For ferrous & Steel use blast in accordance with sa2 or sa2 ½ & remove all the abrasive residues & dust from the surface after sandblasting. -Apply the paint immediately followed surface preparation • Apply the paint immediately followed by surface preparation.
  • Application Procedure

     
  • Safety

     
  • Note

       

medium alkyd mid coat

  • Catalog Download

  • Recommended Use

     Industrial alkyd mid coat is a one component coating . This product as general purpose rust preventing mid coat for alkyd system. This paint is recommended for exterior & interior surfaces of building , steel structures and semi industrial environments, also used for industrial machines.
  • Surface Preparation

     The surface should be free form any rust, moisture, mill scale, oil & grease - Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life - For ferrous & Steel use blast in accordance with sa2 or sa2 ½ & remove all the abrasive residues & dust from the surface after sandblasting. - Apply the paint immediately followed surface preparation
  • Application procedure

  • Safety

  • Note

     

medium alkyd top coat

  • Catalog Download

  • Recommended Use

     Industrial alkyd mid coat is a one component coating . This product as general purpose rust preventing mid coat for alkyd system. This paint is recommended for exterior & interior surfaces of  building , steel structures and semi industrial environments, also used for industrial machines.
  • Surface Preparation

    The surface should be free form any rust, moisture, mill scale, oil & grease - Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life - For ferrous & Steel use blast in accordance with sa2 or sa2 ½ & remove all the abrasive residues & dust from the surface after sandblasting. - Apply the paint immediately followed surface preparation.
  • Application Procedure

  • Safety

  • Note

     

Fast Dry Alkyd Topcoat

  • Catalog Download

  • Recommended Use

    Fast Dry Alkyd top coat is a one component coating.This Paint is recommended for various purposes such as machinery, steel structures, and semi industrial environments, previously primed with alkyd primers. This product is based on alkyd resin for industrial (outdoor and indoor), flexibility color fastness, Fast Drying, good coverage excellent spray ability and good resistance in mildly to corrosive environments of the main properties of this paint.
  • Surface Preparation

    -The surface should be free form any rust, moisture, mill scale, oil & grease - Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environmental condition & the service life - For ferrous & Steel use blast in accordance with sa2 or sa2 ½ & remove all the abrasive residues & dust from the surface after sandblasting. - Apply the paint immediately followed by surface preparation .
  • Application Procedure

    - Flush equipment with recommended cleaner before use . - Stir paint with a Power Mixer. - Use Shakiba’s thinner for adjusting the viscosity. -The thinner should be added gradually. -The consumptiondepends on temperature & type ofequipment & thickness paint . -Clean all equipment with Shakiba’s thinner.
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      - Density , solid contents theoretical coverage are dependent on color - Drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. For better adhesion on unsteel, we offer wash primer as on under. -This information given 25temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert.

medium alkyd varnish

  • Catalog Download

  • Recommended Use

    Industrial alkyd mid coat is a one component coating . This product as general purpose rust preventing mid coat for alkyd system. This paint is recommended for exterior & interior surfaces of building , steel structures and semi industrial environments, also used for industrial machines.
  • Surface Preparation

    The surface should be free form any rust, moisture, mill scale, oil & grease - Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life - For ferrous & Steel use blast in accordance with sa2 or sa2 ½ & remove all the abrasive residues & dust from the surface after sandblasting. - Apply the paint immediately followed surface preparation
  • Application procedure

  • Safety

  • Note

     

Micacouce Iron Oxide (MIO) Alkyd Mid Coat

  • Catalog Download

  • Recommended Use

    Mio alkyd is a one component coating a three- layer system ، comprising alkyd primer, MIO mid coat and alkyd topcoat will result in a high performance coat. This product contains micaceous iron oxide, which enhances the middle corrosive protection and durability of the film. This product is also used for industrial machines and steel structures.
  • Surface Preparation

    -The surface should be free form any rust, moisture, mill scale, oil & grease - Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life . - For ferrous & Steel use primer blast in accordance with sa2 or sa2 ½ & remove all the abrasive residues & dust from the surface after sandblasting. - Apply the paint immediately followed by surface preparation .
  • Application Procedure

    - Flush equipment with recommended cleaner before use - Stir paint with a Power Mixer. - Use Shakiba’s thinner for adjusting the viscosity. -The thinner should be added gradually. -The consumptiondepends on temperature & type of equipment & thickness paint -Clean all equipment with Shakiba’s thinner.
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      - Density , solid contents theoretical coverage are dependent on color - Drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. For better adhesion on unsteel, we offer wash primer as on under. -This information given 25°C temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert.

Aluminum Alkyd Paint

  • Catalog Download

  • Recommended Use

    Alkyd aluminum paint is a one component coating. Color fastness, proper hardness and adhesion are some of the main properties of this product. This paint is an anti- corrosion and electrical conductor paint. Its heat resistance (up to. 1200c) and it is very suitable for outing of radiators, warm condition. Gas sending steel structures and chimneys. This product is not suitable for immersion and should not be used in alkaline condition.
  • Surface Preparation

    -The surface should be free form any rust, moisture, mill scale, oil & grease - Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life - For ferrous & Steel use blast in accordance with sa2 or sa2 ½ & remove all the abrasive residues & dust from the surface after sandblasting. - Apply the paint immediately followed by surface preparation
  • Application Procedure

    - Flush equipment with recommended cleaner before use - Stir paint with a Power Mixer. - Use Shakiba’s thinner for adjusting the viscosity. -The thinner should be added gradually. -The consumptiondepends on temperature & type of equipment & thickness paint -Clean all equipment with Shakiba’s thinner.
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      - Drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. For better adhesion on unsteel, we offer wash primer as on under. -This information given 25°C temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert.

Flat Alkyd Top Coat

  • Catalog Download

  • Recommended Use

    Flat alkyd paint is a one component coating.Proper coverage and high resistance to atmospheric condition are some of the main properties of this product. It is used as a topcoat on wood and masonry surfaces. This paint is recommended for exterior & interior surfaces of building, steel structures and semi industrial environments.
  • Surface Preparation

    -The surface should be free form any rust, moisture, mill scale, oil & grease - Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life - For ferrous & Steel use blast in accordance with sa2 or sa2 ½ & remove all the abrasive residues & dust from the surface after sandblasting. - Apply the paint immediately followed surface preparation.
  • Application Procedure

    - Flush equipment with recommended cleaner before use - Stir paint with a Power Mixer. - Use Shakiba’s thinner for adjusting the viscosity The thinner should be added gradually. The consumptiondepends on temperature & type ofequipment & thickness paint -Clean all equipment with Shakiba’s thinner.
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      - Density , solid contents theoretical coverage are dependent on color -Drying time is dependent on air and steel Temperature, applied film thickness. - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure.   -This information given 25temperature C and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert.

Industrial Alkyd Mid Coatings

  • Catalog Download

  • Recommended Use

    Industrial alkyd mid coat is a one component coating. This product as general purpose rust preventing mid coat for alkyd system. This paint is recommended for exterior & interior surfaces of building, steel structures and semi industrial environments, also used for industrial machines.
  • Surface Preparation

    -The surface should be free form any rust, moisture, mill scale, oil & grease - Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life . - For ferrous & Steel use blast in accordance with sa2 or sa2 ½ & remove all the abrasive residues & dust from the surface after sandblasting. - Apply the paint immediately followed surface preparation .
  • Application Procedure

    - Flush equipment with recommended cleaner before use - Stir paint with a Power Mixer. - Use Shakiba’s thinner for adjusting the viscosity. -The thinner should be added gradually. -The consumptiondepends on temperature & type ofequipment &thickness paint -Clean all equipment with Shakiba’s thinner.
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      - Density , solid contents theoretical coverage are dependent on color - Drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. For better -This information given 25° C temperature and changed temperature cause to change data.   -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert.

Red Lead Alkyd Primer

  • Catalog Download

  • Recommended Use

    Red lead alkyd is a one component coating. Due to the presence of red lead pigment, This primer shows a reasonable resistance, to humidity for industrial applications. Red lead anti-corrosive pigment with good abrasion resistance specifically designed for the blast steel structures. It is recommended to use this product for semi-industrial environments. It can be use for steel and iron surfaces, iron structure, industrial and other equipments.
  • Surface Preparation

    -The surface should be free form any rust, moisture, mill scale, oil & grease - Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life - For ferrous & Steel use blast in accordance with sa2 or sa2 ½ & remove all the abrasive residues & dust from the surface after sandblasting. - Apply the paint immediately followed by surface preparation
  • Application Procedure

    - Flush equipment with recommended cleaner before use - Stir paint with a Power Mixer. - Use Shakiba’s thinner for adjusting the viscosity. -The thinner should be added gradually. -The consumptiondepends on temperature & type of equipment & thickness paint -Clean all equipment with Shakiba’s thinner.
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      -Drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. -This information given 25°C temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert.

Red Oxide Alkyd Primer

  • Catalog Download

  • Recommended Use

    Red oxide alkyd primer is a one component coating. It can be used as a general purpose primer in industrial condition. Abrasion resistance designed for steel structures in semi – industrial environments. It can be applied on steel. It is recommended to use this product for urban industrial environments.
  • Surface Preparation

    -The surface should be free form any rust, moisture, mill scale, oil & grease - Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life - For ferrous & Steel use blast in accordance with sa2 or sa2 ½ & remove all the abrasive residues & dust from the surface after sandblasting. - Apply the paint immediately followed by surface preparation
  • Application Procedure

    - Flush equipment with recommended cleaner before use - Stir paint with a Power Mixer. - Use Shakiba’s thinner for adjusting the viscosity. -The thinner should be added gradually. -The consumption depends on temperature &  type ofequipment &thickness paint -Clean all equipment with Shakiba’s thinner.
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      -Drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. For better adhesion on unsteel, we offer wash primer as on under. -This information given 25temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert.

Varnish Alkyd

  • Catalog Download

  • Recommended Use

    Varnish alkyd is a one component coating.This product is a clear coat based on alkyd resin suitable for decorating& protecting wood made articles.It is easy to clean & resistant to humidity. This product is usually used for both interior & exterior wood works.
  • Surface Preparation

    -The surface should be free form any rust, moisture, mill scale, oil & grease - Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life - Apply the paint immediately followed by surface preparation
  • Application Procedure

    - Flush equipment with recommended cleaner before use - Stir paint with a Power Mixer. - Use Shakiba’s thinner for adjusting the viscosity. The thinner should be added gradually. The consumption depends on temperature & type ofequipment & thickness paint - Clean all equipment with Shakiba’s thinner.
  • Safety

    - This product is flammable it must be kept away from neat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      -Drying time is dependent on air and applied film thickness. - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. -This information given 25°C  temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert.

Zinc Chromate Alkyd Paint

  • Catalog Download

  • Recommended Use

    Zinc chromate Alkyd is a one component coating. This product is an anti-corrosion and quick drying primer. It has resistance to corrosion humidity. Vapour and Industrial environments and it can be created cathodic. Protection on the metal and steel surfaces. This primer can be avoided to program of corrosion from small scratch in environment condition. This Product is good coating for industrial and marine tanker, and industrial machines and steel.
  • Surface Preparation

    -The surface should be free form any rust, moisture, mill scale, oil & grease - Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life - For ferrous & Steel use blast in accordance with sa2 or sa2 ½ & remove all the abrasive residues & dust from the surface after sandblasting. - Apply the paint immediately followed by surface preparation
  • Application Procedure

    - Flush equipment with recommended cleaner before use - Stir paint with a Power Mixer. - Use Shakiba’s thinner for adjusting the viscosity. -The thinner should be added gradually. -The consumption depends on temperature & type of equipment & thickness paint -Clean all equipment with Shakiba’s thinner.
  • Safety

    - This product is flammable it must be kept away from neat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor..
  • Note

      - Density , solid contents theoretical coverage are dependent on color - Drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. - Adjusting the viscosity & pressure. For better adhesion on unsteel, we offer wash primer as on under. -This information given 25temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert.

Zinc Phosphate Alkyd Paint

  • Catalog Download

  • Recommended Use

    Zinc phosphate alkyd is a one component coating. Due to the presence of zinc phosphate pigment, with good anti corrosive and paint system alkyd based abrasion resistance.It is an untoxic paint. It has good resistance to moisture, Vapour and industrial environment. This paint can be avoided to progress of corrosion from small scratch. This product is also for industry and marine tankers, Food and industrial machines & steel structures. It has excellent adhesion and coverage.
  • Surface Preparation

    -The surface should be free form any rust, moisture, mill scale, oil & grease - Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life - For ferrous & Steel use blast in accordance with sa2 or sa2 ½ & remove all the abrasive residues & dust from the surface after sandblasting. - Apply the paint immediately followed by surface preparation .
  • Application Procedure

    - Flush equipment with recommended cleaner before use - Stir paint with a Power Mixer. - Use Shakiba’s thinner for adjusting the viscosity. -The thinner should be added gradually. -The consumption depends on temperature & type of equipment & thickness paint -Clean all equipment with Shakiba’s thinner.
  • Safety

    - This product is flammable it must be kept away from neat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      - Density , solid contents theoretical coverage are dependent on color - Drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. For better adhesion on unsteel, we offer wash primer as on under. -This information given 25temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert.

Stoving Alkyd Melamine Top Coat

  • Catalog Download

  • Recommended Use

    Stoving alkyd melamine top coat is a one component coating. This paint base on alkyd resin & melamine formaldehyde resin. The gloss of this product is high and stable; it has high resistance to moisture, water, petrol oil and grease. Excellent good resistance to heat after baking , It is not recommended to use. It can be used for metal & steel surfaces such as bikes and motor bikes refrigerator. Washing machine, Boiler & cars.
  • Surface Preparation

    - The surface should be free form any rust, moisture, mill scale, oil & grease - Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life - Apply the paint immediately followed by surface preparation
  • Application Procedure

    - Flush equipment with recommended cleaner before use - Stir paint with a Power Mixer. - Use Shakiba’s thinner for adjusting the viscosity. -The thinner should be added gradually. -The consumption depends on temperature & type of equipment & thickness paint -Clean all equipment with Shakiba’s thinner.
  • Safety

    - This product is flammable it must be kept away from neat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      - Density , solid contents theoretical coverage are dependent on color - Drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. - Adjusting the viscosity & pressure. - This information given 25°C temperature and changed temperature cause to change data. - Don’t use different thinner; otherwise we decline all responsibilities of it. - For more information, please call to sale engineering expert.

Stoving Alkyd Melamine Varnish

  • Catalog Download

  • Recommended Use

    Stoving alkyd varnish is a one component coating. This varnish base on alkyd resin and melanin formaldehyde resin. It provides reasonable heat resistance abrasion & scratching resistance as well as resistance against chemical spillages. It can be used for metal & steel surfaces such as bikes and motorcycles, refrigerator, washing machine, boiler and cars.
  • Surface Preparation

    - The surface should be free form any rust, moisture, mill scale, oil & grease - Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life - Apply the paint immediately followed by surface preparation
  • Application Procedure

    - Flush equipment with recommended cleaner before use - Stir paint with a Power Mixer. - Use Shakiba’s thinner for adjusting the viscosity. - The thinner should be added gradually. - The consumption depends on temperature & type of equipment & thickness paint - Clean all equipment with Shakiba’s thinner.
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      - Never apply coatings under environmental condition. - Adjusting the viscosity & pressure. - This information given 25°C  temperature and changed temperature cause to change data. - Don’t use different thinner; otherwise we decline all responsibilities of it. - For more information, please call to sale engineering expert.

Alkyd UrethaneTop Coat

  • Catalog Download

  • Recommended Use

    Alkyd Urethane is a one component coating. This paint is intermediate between polyurethane and alkyd topcoats the cured film has good hardness, with excellent gloss retention and weathering & properties as well as chemical and compatibility with a variety of primers.
  • Surface Preparation

    -The surface should be free form any rust, moisture, mill scale, oil & grease -Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life -Apply the paint immediately followed by surface preparation.
  • Application procedure

    -Flush equipment with recommended cleaner before use -Stir paint with a Power Mixer. -Use Shakiba’s thinner for adjusting theviscosity. -The thinner should be added gradually. -The consumptiondepends on temperature& typeofequipment & thickness paint -Clean all equipment with Shakiba’s thinner.
  • Safety

    -This product is flammable it must be kept away from heat, flash & flame -keep container closed use with adequate ventilation & Earth -Prolonged & repeated contact with skin may be harmful -In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      -Density , solid contents theoretical coverage aredependent on color -Drying time is dependent on air and steel temperature, applied film thickness. -Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. -This information given 25°C temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert .

Aluminum Alkyd Paint

  • Catalog Download

  • Recommended Use

    Aluminum alkyd paint is a one component paint base on alkyd resin coating which has general properties of alkyd paint such as proper coverage, high resistance to atmospheric condition, short dry time and good adhesion on steel structure. This product has brilliant surface which makes it proper for decorative and protective uses in city environments and appliance. This product is not suitable for humid weather.
  • Surface Preparation

    • The surface should be free from any rust, moisture, mill scale, oil and grease • Mechanical and chemical surface preparation methods should be performed depending on the type of contamination, the coating system environmental condition and service life.   • Apply the paint immediately followed by surface preparation.
  • Application procedure

    -Flush equipment with recommended cleaner before use -Stir paint with a Power Mixer. -Use Shakiba’s thinner for adjusting the viscosity. -The thinner should be added gradually. -The consumption depends on temperature & type of equipment & thickness paint -Clean all equipment with Shakiba’s thinner.
  • Safety

    -This product is flammable it must be kept away from heat, flash & flame -keep container closed use with adequate ventilation & Earth -Prolonged & repeated contact with skin may be harmful -In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      -Density , solid contents theoretical coverage are dependent on color -Pot life,drying time is dependent on air and steel temperature, applied film thickness. -Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. For better adhesion on un steel, we offer wash primer as on under. -This information given 25°C temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert.