Chlorinated rubber Intermediate

  • Catalog Download

  • Recommended Use

    Zinc chromate chlorinated rubber paint is a ‘one component’ paint. This product is used as a second layer in a complete system of coating and improves its life and its resistance against atmosphere conditions. High resistance against water, acids, chemicals, moisture, salt water and mineral oils, are some of the general properties of this product. It can be applied on steel and marine structures decks and super structures, tank exteriors, refineries, power plants, and etc.
  • Surface Preparation

    • The surface should be free from any rust, moisture, mill scale, oil and grease • Mechanical and chemical surface preparation methods should be performed depending on the type of contamination, the coating system environmental condition and service life. • Apply the paint immediately followed by surface preparation.
  • Application Procedure

    • Flush equipment with cleaner before use • Stir two components with a power mixer. Notice pot life time and mixing ratio • Use Shakiba`s thinner for adjusting the viscosity • The thinner should be added gradually • The consumption depends on temperature and type of equipment and thickness paint • Clean all equipment with Shakiba`s thinner
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame    - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      - Density , solid contents theoretical coverage are dependent on color - Pot life, drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. For better adhesion on un steel, we offer wash primer as on under. -This information given 25°C temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert.

Chlorinated Rubber Paint

  • Catalog Download

  • Recommended Use

    Chlorinated rubber paint is a one component coating. excellent resistance against water, acids and chemical material,moisture,salt water , salts and mineral oils, are some of the general characteristics of this product. This product can be applied on steel and marine structures decks & super structures, tank exteriors, refineries, power plants, etc.
  • Surface Preparation

    -The surface should be free form any rust, moisture, mill scale, oil & grease - Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life - For ferrous & Steel use blast in accordance with sa2 or sa2 ½ & remove all the abrasive residues & dust from the surface after sandblasting. - Apply the paint immediately followed by surface preparation
  • Application Procedure

    - Flush equipment with recommended cleaner before use - Stir paint with a Power Mixer. - Use  Shakiba’s thinner for adjusting the viscosity. - The thinner should be added gradually. - The consumptiondepends on temperature & type ofequipment & thickness paint - Clean all equipment with  Shakiba’s thinner.
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      - Density , solid contents theoretical coverage are dependent on color - Drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. - Adjusting the viscosity & pressure. For better adhesion on unsteel, we offer wash primer as on under. - This information given 25°C  temperature & changed temperature cause to change data. - Don’t use different thinner; otherwise we decline all responsibilities of it. - For more information, please call to sale engineering expert.

Iron Oxide Chlorinated rubber Primer

  • Catalog Download

  • Recommended Use

    Iron oxide chlorinated rubber paint is a ‘one component’ paint. This product contains iron oxide pigment, so that it is usually used as primer in a whole coating system. High resistance against water, acids, chemicals, moisture, salt water and mineral oils, are some of the general properties of this product. It can be applied on steel and marine structures decks and super structures, tank exteriors, refineries, power plants, and etc.
  • Surface Preparation

    • The surface should be free from any rust, moisture, mill scale, oil and grease • Mechanical and chemical surface preparation methods should be performed depending on the type of contamination, the coating system environmental condition and service life. • Apply the paint immediately followed by surface preparation.
  • Application Procedure

    • Flush equipment with cleaner before use • Stir paint with a power mixer • Use  Shakiba`s thinner for adjusting the viscosity   • The thinner should be added gradually • The consumption depends on temperature and type of  equipment and thichness paint • Clean all equipment with Shakiba`s thinner
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor. - In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      - Density , solid contents theoretical coverage are dependent on color - Pot life, drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. For better adhesion on un steel, we offer wash primer as on under. -This information given 25°C temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert.

Traffic Paint (Chlorinated rubber)

  • Catalog Download

  • Recommended Use

    Traffic paint is a ‘one component’ paint. This product is used on cement and asphalting roads high ways and airports. This paint will be dry in short time after applying and achieve smooth and uniform surface.
  • Surface Preparation

    • The surface should be free from any rust, moisture, mill scale, oil and grease • Mechanical and chemical surface preparation methods should be performed depending on the type of contamination, the coating system environmental condition and service life. • Apply the paint immediately followed by surface preparation.
  • Application Procedure

    • Flush equipment with cleaner before use • Stir paint with a power mixer  • Use  Shakiba`s thinner for adjusting the viscosity • The thinner should be added gradually • The consumption depends on temperature and type of equipment and thichness paint • Clean all equipment with  Shakiba`s thinner
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      - Density , solid contents theoretical coverage are dependent on color - Pot life, drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. For better adhesion on un steel, we offer wash primer as on under. -This information given 25°C temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert.

Zinc Chromate Chlorinated rubber Primer

  • Catalog Download

  • Recommended Use

    Zinc chromate chlorinated rubber paint is a ‘one component’ paint. This product contains zinc chromate as an anti-corrosive pigment so that it is usually used as anti-corrosive primer in severe atmosphere condition. High resistance against water, acids, chemicals, moisture, salt water and mineral oils, are some of the general properties of this product. It can be applied on steel and marine structures decks and super structures, tank exteriors, refineries, power plants, and etc.
  • Surface Preparation

    • The surface should be free from any rust, moisture, mill scale, oil and grease • Mechanical and chemical surface preparation methods should be performed depending on the type of contamination, the coating system environmental condition and service life. • Apply the paint immediately followed by surface preparation.
  • Application Procedure

    • Flush equipment with cleaner before use • Stir paint with a power mixer • Use  Shakiba`s thinner for adjusting the viscosity • The thinner should be added gradually • The consumption depends on temperature and type of equipment and thickness paint • Clean all equipment with  Shakiba`s thinner
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      - Density , solid contents theoretical coverage are dependent on color - Pot life, drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. For better adhesion on un steel, we offer wash primer as on under. -This information given 25°C temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert.

Zinc Phosphate Chlorinated rubber Primer

  • Catalog Download

  • Recommended Use

    Zinc phosphate chlorinated rubber paint is a ‘one component’ paint. This product contains zinc phosphate as an anti-corrosive pigment so that it is usually used as anti-corrosive primer in severe atmosphere condition. High resistance against water, acids, chemicals, moisture, salt water and mineral oils, are some of the general properties of this product. It can be applied on steel and marine structures decks and super structures, tank exteriors, refineries, power plants, and etc.
  • Surface Preparation

    • The surface should be free from any rust, moisture, mill scale, oil and grease • Mechanical and chemical surface preparation methods should be performed depending on the type of contamination, the coating system environmental condition and service life. • Apply the paint immediately followed by surface preparation.
  • Application Procedure

    • Flush equipment with cleaner before use •  Stir two components with a power mixer. Notice pot life time and mixing ratio • Use Shakiba`s thinner for adjusting the viscosity • The thinner should be added gradually • The consumption depends on temperature and type of equipment and thickness paint • Clean all equipment with Shakiba`s thinner
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      - Density , solid contents theoretical coverage are dependent on color - Pot life, drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. For better adhesion on un steel, we offer wash primer as on under. -This information given 25°C temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert.