Alkyd Bitumen Paint

  • Catalog Download

  • Recommended Use

    This is an alkyd paint which is modified by bitumen and totally has general properties of alkyd paint such as proper coverage, high resistance to atmospheric condition, short dry time and good adhesion on steel structure. This product usually applied as a single layer to protect metal surfaces in indoor condition or surfaces which are not contact to direct sun light for long time. It can be use to concrete surface too.
  • Surface Preparation

    • The surface should be free from any rust, moisture, mill scale, oil and grease. • If the surface is smooth, it should rub by sand paper. • Mechanical and chemical surface preparation methods should be performed depending on the type of contamination, the coating system, environmental condition and service life. • The damaged area of primer and subsequent layer should repair. • Apply the paint immediately followed by surface preparation.
  • Application Procedure

    • Flush equipment with cleaner before use • Stir paint with a power mixer • Use Shakiba`s thinner for adjusting the viscosity • The thinner should be added gradually • The consumption depends on temperature and type of equipment and thickness paint • Clean all equipment with Shakiba`s thinner
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      - Density , solid contents theoretical coverage are dependent on color - Pot life, drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. For better adhesion on un steel, we offer wash primer as on under. -This information given 25°C temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert.

Alkyd Coltar Paint

  • Catalog Download

  • Recommended Use

    Coltar Alkyd is a ‘one component’ coating base on alkyd resin which is modified by coltar to make it more resistance and flexible .This product is suitable for roundhouse, pipes maintained under ground, machineries, and other steel surfaces in the industrial area. It is resistance to penetration of moisture and water. This product has tendency to be soft and fine in high temperature and direct sun light.
  • Surface Preparation

    • The surface should be free from any rust, moisture, mill scale, oil and grease. • If the surface is smooth, it should rub by sand paper. • Mechanical and chemical surface preparation methods should be performed depending on the type of contamination, the coating system, environmental condition and service life. • The damaged area of primer and subsequent layer should repair. • Apply the paint immediately followed by surface preparation.
  • Application Procedure

    • Flush equipment with cleaner before use • Stir paint with a power mixer • Use Shakiba`s thinner for adjusting the viscosity • The thinner should be added gradually • The consumption depends on temperature and type of equipment and thickness paint • Clean all equipment with Shakiba`s thinner
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      - Density , solid contents theoretical coverage are dependent on color - Pot life, drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. For better adhesion on un steel, we offer wash primer as on under. -This information given 25°C temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert.

Alkyd UrethaneTop Coat

  • Catalog Download

  • Recommended Use

    Alkyd Urethane is a one component coating. This paint is intermediate between polyurethane and alkyd topcoats the cured film has good hardness, with excellent gloss retention and weathering & properties as well as chemical and compatibility with a variety of primers.
  • Surface Preparation

    -The surface should be free form any rust, moisture, mill scale, oil & grease - Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life - Apply the paint immediately followed by surface preparation
  • Application Procedure

    - Flush equipment with recommended cleaner before use - Stir paint with a Power Mixer. - Use Shakiba’s thinner for adjusting the viscosity. -The thinner should be added gradually. -The consumptiondepends on temperature & type of equipment & thickness paint -Clean all equipment with Shakiba’s thinner.
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful   - In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      - Density , solid contents theoretical coverage are dependent on color -Drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. -This information given 25°C temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert. 

Alkyd phenolic Paint

  • Catalog Download

  • Recommended Use

    Alkyd phenolic paint is a one component coating. This product is based on modify alkyd resin whit phenolic. Flexibility and good resistance in mildly to corrosive environments are some of the main properties of this product . This paint is recommended for various general purposes such as machinery, Steel structures, and industry environments, over concrete.
  • Surface Preparation

    -The surface should be free form any rust, moisture, mill scale, oil & grease - Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environmental condition & the service life . - Apply the paint immediately followed by surface preparation
  • Application Procedure

    - Flush equipment with recommended cleaner before use - Stir paint with a Power Mixer. - Use Shakiba’s thinner for adjusting the viscosity. -The thinner should be added gradually. -The consumption depends on temperature & type of equipment & thickness paint -Clean all equipment with Shakiba’s thinner.
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      - Density , solid contents theoretical coverage are dependent on color -Drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. -This information given 25°C temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert.