Acrylic Melamine Coating

  • Catalog Download

  • Recommended Use

    This paint is a ‘one component’ paint base on acrylic resin which its film were formed by curing in a stove. After film formation it has good adhesion and appearance and resistance against scratch, moisture and atmospheric condition. This product applied on steel surfaces, appliance, machineries and etc.
  • Surface Preparation

    •The surface should be free from any rust, moisture, mill scale, oil and grease. • If the surface is smooth, it should rub by sand paper. • Mechanical and chemical surface preparation methods should be performed depending on the type of contamination, the coating system, environmental condition and service life. • The damaged area of primer and subsequent layer should repair. • Apply the paint immediately followed by surface preparation.
  • Application Procedure

    • Flush equipment with cleaner before use • Stir paint with a power mixer • Use Shakiba`s thinner for adjusting the viscosity • The thinner should be added gradually • The consumption depends on temperature and type of equipment and thickness paint • Clean all equipment with Shakiba`s thinner
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.

  • Note

      - Density , solid contents theoretical coverage are dependent on color - Pot life, drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. For better adhesion on un steel, we offer wash primer as on under. -This information given 25°C temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it.

Polyester Melamine Paint

  • Catalog Download

  • Recommended Use

    This paint is a ‘one component’ paint base on polyester melamine resin which its film were formed by curing in a stove. After film formation it has good adhesion and appearance and resistance against scratch, moisture and atmospheric condition. This product applied on steel surfaces, appliance, machineries and etc
  • Surface Preparation

    • The surface should be free from any rust, moisture, mill scale, oil and grease. • If the surface is smooth, it should rub by sand paper. • Mechanical and chemical surface preparation methods should be performed depending on the type of contamination, the coating system, environmental condition and service life. • The damaged area of primer and subsequent layer should repair. • Apply the paint immediately followed by surface preparation.
  • Application Procedure

    • Flush equipment with cleaner before use • Stir paint with a power mixer • Use Shakiba`s thinner for adjusting the viscosity • The thinner should be added gradually • The consumption depends on temperature and type of equipment and thickness paint • Clean all equipment with Shakiba`s thinner .
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.

  • Note

      - Density , solid contents theoretical coverage are dependent on color - Pot life, drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. For better adhesion on un steel, we offer wash primer as on under. -This information given 25°C temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it.

Stoving Acrylic top coat

  • Catalog Download

  • Recommended Use

    Acrylic Stoving is a one component coating. This paint base on acrylic resin. The gloss of this product is high & stable; it has high adhesion, excellent elasticity. It is recommended for apply decorative appliances, bike and motorbike, machinery parts.
  • Surface Preparation

    -The surface should be free form any rust, moisture, mill scale, oil & grease - Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life - Apply the paint immediately followed by surface preparation
  • Application Procedure

    - Flush equipment with recommended cleaner before use - Stir paint with a Power Mixer. - Use Shakiba’s thinner for adjusting the viscosity. -The thinner should be added gradually. -The consumptiondepends on temperature& type of equipment & thickness paint -Clean all equipment with Shakiba’s thinner.
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.

  • Note

      - Density , solid contents theoretical coverage are dependent on color - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. -This information given 25°C temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it.

Stoving Alkyd Melamine Top Coat

  • Catalog Download

  • Recommended Use

    Stoving alkyd melamine top coat is a one component coating. This paint base on alkyd resin & melamine formaldehyde resin. The gloss of this product is high and stable; it has high resistance to moisture, water, petrol oil and grease. Excellent good resistance to heat after baking , It is not recommended to use. It can be used for metal & steel surfaces such as bikes and motor bikes refrigerator. Washing machine, Boiler & cars.
  • Surface Preparation

    -The surface should be free form any rust, moisture, mill scale, oil & grease - Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life - Apply the paint immediately followed by surface preparation
  • Application Procedure

    - Flush equipment with recommended cleaner before use - Stir paint with a Power Mixer. - Use Shakiba’s thinner for adjusting the viscosity. -The thinner should be added gradually. -The consumptiondepends on temperature& type of equipment &thickness paint -Clean all equipment with Shakiba’s thinner.
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.

  • Note

      - Density , solid contents theoretical coverage are dependent on color - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. -This information given 25°C temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert .

Stoving Alkyd melamine Varnish

  • Catalog Download

  • Recommended Use

    Stoving alkyd varnish is a one component coating. This varnish base on alkyd resin and melanin formaldehyde resin. It provides reasonable heat resistance abrasion & scratching resistance as well as resistance against chemical spillages. It can be used for metal & steel surfaces such as bikes and motorcycles, refrigerator, washing machine, boiler and cars.
  • Surface Preparation

    -The surface should be free form any rust, moisture, mill scale, oil & grease - Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life - Apply the paint immediately followed by surface preparation
  • Application Procedure

    - Flush equipment with recommended cleaner before use - Stir varnish with a Power Mixer. - Use Shakiba’s thinner for adjusting the viscosity. -The thinner should be added gradually. -The consumptiondepends on temperature& type of equipment & thickness paint -Clean all equipment with Shakiba’s thinner.
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.

  • Note

      - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. -This information given 25°C temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert..