Industrial Vinyl Top Coatings

  • Catalog Download

  • Recommended Use

    Vinyl topcoat is a one component coating. This paint has good adhesion, hardness and gloss retention. This product with good resistant to mild acid or alkaline splashing specifically designed for steel Structures in industrial environments. It also shows reasonable weather resistance as well as resistance against fresh and salt containing water.
  • Surface Preparation

    -The surface should be free form any rust, moisture, mill scale, oil & grease - Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life - For ferrous & Steel use blast in accordance with sa2 or sa2 ½ & remove all the abrasive residues & dust from the surface after sandblasting.
  • Application Procedure

    - Flush equipment with recommended cleaner before use - Stir paint with a Power Mixer. - Use Shakiba’s thinner for adjusting the viscosity. -The thinner should be added gradually. -The consumption depends on temperature & type of equipment & thickness paint -Clean all equipment with Shakiba’s thinner.
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.

  • Note

      - Density , solid contents theoretical coverage are dependent on color -Drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. For better adhesion on unsteel, we offer wash primer as on under. -This information given 25°C temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert.

Wash Primer

  • Catalog Download

  • Recommended Use

    Wash primer is a two component coating. It is used as a pre- treatment coating on clean and unpainted ferrous & non- ferrous substrates such as aluminum, copper, tin, cadmium, zinc. brass & galvanized steel. Prior to applying the new coating system in order to increase adhesion and corrosion resistance. As a result, we offer wash primer as connection factor between paint and surface and it can also be used as an under coat.
  • Surface Preparation

    -The surface should be free form any rust, moisture, mill scale, oil & grease - Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life - Apply the paint immediately followed by surface preparation .
  • Application Procedure

    - Flush equipment with recommended cleaner before use - Stir component A (base) with a Power Mixer. - Add hardener to base in the proper Mixing continue stirring for 20-30 Minutes. - After 30 minutes add Shakiba’s Thinner until color change from yellow to yellow green,then wash primer is ready to use. - Use Shakiba’s thinner for adjusting the viscosity. -The con sumption depends on temperature & type of equipment & thickness paint .
  • Safety

    - This product is flammable it must be kept away from heat, flash & flame - keep container closed use with adequate ventilation & Earth - Prolonged & repeated contact with skin may be harmful - In case of eye contact flush with plenty of water and check with a medical doctor.

  • Note

      - Pot life, drying time is dependent on air and steel temperature, applied film thickness. - Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. -This information given 25°C temperature and changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert .