رنگ شکیبا

رنگ شکیبا

  • Catalog Download

  • Recommended Use

    This paint is used for fast, beautiful and durable painting of interior and exterior surfaces (plaster, cement, brick, cementcomposition panels, wood, etc). This paint with high quality has a good resistance against abrasion and washing, with good stability to sunlight, water and alkali materials permeation. Therefore it is recommended for exterior surfaces, especially exteriordecoration of buildings. Fast drying time, ease of application and environmentally friendly, are the other advantages of this paint.
  • HOW TO USE

    1-Clean the surface with water. In order to remove dust ( Brush must be used for cleaning the surface's mineral salts ) also the surface must be cleaned from any dust and grease , evenold paints , till achieving a suitablesurface . For cleaning cement surfaces use Water Jet method. Be sure about complete drying of surface. 2-Before applying the paint using special sealer for facade paint (ALCO-3306) is recommended .This sealer by having high permeation to surface's cracks and filling the pores and by having high absorbing ability in addition to create better adhesion for applying paint, also increase's coverage and durability of paint. This sealer is suggested for absorber surfaces such as plaster, concrete, brick, cement composition panels. 3-Dilute Kamel Rang Shakiba Acrylic Latex paint with proper amount of water, and then apply on the surface. Dilution ratio of paint with water depends on environment’s temperature, surface and also painting tools. But in normal painting conditions, dilution ratio of paint with water is based on weight percentage, with brush 40%, with roller 30% and with paint gun 60%. 4-The proper temperature for applying paint is 10-35º C and interval time between applying layers is 3 hours. 5-In order to increasing life time and durability of facade paint and creating a surface with more glossiness or matt and more beautiful aspect, applying one layer of Acrylic waterbase lacquer (ALCO-3112,3113,3114) on the facade paint , is recommended . Applying these lacquers, according to amount of glossiness can be defined.
  • RECOMMENDATIONS

    1-Stir the content well before use. 2-Spraying is suggested. 3-Before applying the paint, it is recommended to use special sealer for facade paint (ALCO-3306). 4-In order to increase life timeand durability of facade paint and creating a surface with more beautiful aspect, it's recommended to use a layer of Kamel Rang Shakiba water base lacquer as final layer.
  • HOW TO CLEAN TOOLS

    Remove the spillage of substance with soap and warm water immediately. Also after use, wash your hands and painting tools with warm water and soap. For preventing corrosion of painting tools and equipments, wash them with white spirit and dry themimmediately.
  • SAFETY POINTS

      Keep the paint canin dry and cool place, far from the direct sunlight. Keep the can closed after use. Prevent paint from freezing. It is recommended to use this productbefore the expire date (maximum 6 months). Sanding or scraping the old Alkyd painted surface can cause poisonous lead dust. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure of lead or other hazardous substances requires the use of proper protective equipment, such as proper fitted respirator(NIOSH approved) and proper containments .Finally, clean up your working area

  • Catalog Download

  • Recommended Use

    This paint is a ‘one component’ paint base on acrylic emulsion resin which its film wereformed by evaporation. After film formation it has good adhesion and appearance and resistance against scratch, moisture atmospheric condition. This product applied on cementand plaster as decorative and protective coating. Its drying time is really short and it can bewashed easily.
  • Surface Preparation

    •The surface should be free from any rust, moisture, mill scale, oil and grease • Mechanical and chemical surface preparation methods should be performed depending on the type of contamination, the coating system environmental condition and service life. • Apply the paint immediately followed by
  • Application Procedure

    • Flush equipment with cleaner before use • Stir paint with a power mixer • Use water for adjusting the viscosity • The thinner should be added gradually • The consumption depends on temperature and type of equipment and thickness paint • Clean all equipment with water
  • Safety

    -This product is flammable it must be kept away from heat, flash & flame -keep container closed use with adequate ventilation & Earth -Prolonged & repeated contact with skin may be harmful -In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      -Density , solid contents theoretical coverage are dependent on color -Pot life, drying time is dependent on air and steel temperature, applied film thickness. -Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. For better adhesion on un steel, we offer wash primer as on under. -This information given 25°C temperatureand changed temperature cause to change data. -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to saleengineering expert.

  • Catalog Download

  • Recommended Use

    Semi gloss alkyd paint is a one component coating. Proper coverage and high resistance to atmospheric condition are some of the main properties of this product. It is used as a topcoat on wood and masonry surfaces. This paint is recommended for exterior & interior surfaces of building, steel structures and semi industrial environments.
  • Surface Preparation

    -The surface should be free form any rust, moisture, mill scale, oil & grease -Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life -For ferrous & Steel use blast in accordance with sa2 or sa2 ½ & remove allthe abrasive residues& dust from the surface after sandblasting. -Apply the paint immediately followed surface preparation
  • Application Procedure

    -Flush equipment with recommended cleaner before use -Stir paint with a Power Mixer. -Use Shakiba’s thinner for adjusting the viscosity. -The thinner should be added gradually. -The consumptiondepends on temperature & type ofequipment & thickness paint -Clean all equipment with Shakiba’s thinner.
  • Safety

    -This product is flammable it must be keptaway from heat, flash & flame -keep container closed usewith adequate ventilation & Earth&nbsp -Prolonged & repeated contact with skin may be harmful&nbsp -In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      -Density , solid contents theoretical coverage are dependent on color&nbsp -Drying time is dependent on air and steel temperature, applied film thickness -Never apply coatings under environmental condition -Adjusting the viscosity & pressure. For better adhesion on unsteel, weoffer wash primer ason under -This information given 25°Ctemperature and changed temperature cause to change data -Don’t use different thinner; otherwise we decline all responsibilities of it. -For more information, please call to sale engineering expert.

  • Catalog Download

  • Recommended Use

    Gloss alkyd topcoat is a one component coating. This product is based on alkyd resin for decorative (outdoor and indoor) color fastness, high gloss, good coverage. Excellent spray ability. Flexibility and good resistance in mildly to corrosive environments are some of the main properties of this product. This paint is recommended for various purposes such as machinery. Steel structures and semi industrial environments.
  • Surface Preparation

    -The surface should be free form any rust, moisture, mill scale, oil & grease -Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life -Apply the paint immediately followed by surface preparation
  • Application Procedure

    •Flush equipment with recommended cleaner before use •Stir paint with a Power Mixer. •Use Shakiba’s thinner for adjusting the viscosity. •The thinner should be added gradually. •The consumptiondepends on temperature & type ofequipment & thickness paint •Clean all equipment with Shakiba’s thinner.
  • Safety

    -This product is flammable it must be kept away from heat, flash & flame -keep container closed use with adequate ventilation & Earth -Prolonged & repeated contact with skin may be harmful -In case of eye contact flush with plenty of water and check with a medical doctor.
  • Note

      -Don’t use different thinner; otherwise we decline all responsibilities of it. -Density , solid contents theoretical coverage are dependent on color -Drying time is dependent on air and steel temperature, applied film thickness. -Never apply coatings under environmental condition. -Adjusting the viscosity & pressure. -This information given 25°Ctemperature and changed temperature cause to change data. -For more information, please call to sale engineering expert. -For more information, please call to sale engineering expert.

  • Catalog download

  • Recommended Use

    KAMEL RANG SHAKIBA Alkyd Anti-corrosion is made of alkyd resin based and the highest corrosion resistant materials . This primer is applied on metal or similar surfaces as the first layer and has a suitable adhesion and durability.
  • How to use

    Clean the surface from any contamination and grease and wait till complete drying. Old paint's flakes must be cleaned from the surface till a flat surface achieved ( If needed you can use sandpaper to remove the previous paints ). Brush must be used for cleaning the surface saltpetre. Metal surfaces must be cleaned from any rusts and filing. Then dilute KAMEL RANG SHAKIBA Anti-Corrosion Primer with proper amount of special white spirit thinner and apply it by brush ,roller or paintgun on the surface. Dilution ratio of Anti-Corrosion with thinner depends on surface and painting tools. But in normal weather conditions amount of dilution with thinner is as follows: Brush: 20% to 40% of weight. Paint gun :40 % to 70 % of weight. Roller : 10% to 30 % of weight.
  • How to clean tools

    After use , wash your hands and painting tools with mineral spirit or white spirit. Follow manufacturer's safety recommendations when using white spirit.
  • Recommendations

    1-Stir the content well before use. 2-Add the necessary amount of white spirit thinner to primer slowly and simultaneously mix it.
  • Safety points and storage conditions

      Keep the primer can in dry , cool place and far from the direct sunlight. Keep the can closed after use. It is recommended to use this product before the expire date (Maximum 12 months ). While applying , use a suitable air conditioning and leave the doors and windows open. In case of epiphora , headache or other diseases , breath more fresh air or use fitted respirators (NIOSH approved) or leave the working area. Avoid eye touch , in the case of touch , wash your eyes with lots of water . Wash hands after use. If swallowed , go to medical centers. Sanding or scraping the old Alkyd painted surfaces can cause poisonous lead dust. Exposure to lead dust or fumes may cause brain damage or other adverse health effects , especially in children or pregnant women. Controll ingexposure of lead or other hazardous substances requires the use of proper protective equipment , such as proper fitted respirator ( NIOSH approved )and proper tools .Finally , clean up your working area.

Template Settings

Color

For each color, the params below will give default values
Tomato Cyan Green Pink Purple Yellow

Body

Background Color
Text Color

Background

Patterns for Layout Style: Boxed
Layout Style
Select menu
Google Font
Body Font-size
Body Font-family