Manufacture of Industrial, Protective, Marine Traffic, Automotive & Decorative Paints
Anti- acid epoxy is a two component coating. This paint formulated for concrete to provide resistance against Spillage of various chemicals such as alkaline, acids and salt solutions. This product can be used as a protective coating in factories warehouses Silos, etc. It provides long term resistance to corrosion even under mechanical strength condition.
• The surface should be free form any rust, moisture, mill scale, oil & grease
• Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life
• Apply the paint immediately followed by surface preparation
• Flush equipment with recommended cleaner before use .
• Stir component A (base) with a Power Mixer.
• Add hardener to base in the proper Mixing continue stirring for 5 minutes.
• Since the pot life is limited & shortened by high temperatures, do not mix more material than will be used in 1 hours at 25°C
• This product is flammable it must be kept away from heat, flash & flame
• keep container closed use with adequate ventilation & Earth
• Prolonged & repeated contact with skin may be harmful
• In case of eye contact flush with plenty of water and check with a medical doctor.
• Density , solid contents theoretical coverage are dependent on color
• Pot life, drying time is dependent on air and steel temperature, applied film thickness.
• Never apply coatings under environmental condition.
• This information given 25°C temperature and changed temperature cause to change data.
• For more information, please call to sale engineering expert.
For more information about this product, you can download the related PDF file from the link below.