Manufacture of Industrial, Protective, Marine Traffic, Automotive & Decorative Paints
Epoxy polyamine topcoat is a two component coating. this product has good resistance to splash and fumes of an acids, alkalis, solvent and fresh and salt water steel and off shore structures, as well as exterior tank and pipe surfaces can be coated by this paint to obtain higher resistance in corrosive environment. Such as coating system is recommended for power plants, petrochemical & oil refining and machinery.
• The surface should be free form any rust, moisture, mill scale, oil & grease
• Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life
• For ferrous & Steel use as primer blast in accordance with sa2 or sa2 ½ & remove all the abrasive residues & dust from the surface after sandblasting.
• Apply the paint immediately followed by surface preparation
• Flush equipment with recommended cleaner before use
• Stir component A (base) with a Power Mixer.
• Add hardener to base in the proper Mixing continue stirring for 5-10 Minutes.
• After 20 – 30 minutes add Shakiba’s thinner for ready to use – Use Shakiba’s thinner for adjusting the viscosity.
• The consumption depends on temperature & type of equipment & thickness paint
• This product is flammable it must be kept away from heat, flash & flame
• Keep container closed use with adequate ventilation & Earth
• Prolonged & repeated contact with skin may be harmful
• In case of eye contact flush with plenty of water and check with a medical doctor.
• Density , solid contents theoretical coverage are dependent on color
• Pot life, drying time is dependent on air and steel temperature, applied film thickness.
• Never apply coatings under environmental condition.
• Adjusting the viscosity & pressure. For better adhesion on un steel, we offer wash primer as on under.
• This information given 25°C temperature and changed temperature cause to change data.
• Don’t use different thinner; otherwise we decline all responsibilities of it.
For more information about this product, you can download the related PDF file from the link below.
Manufacture of Industrial, Protective, Marine Traffic, Automotive & Decorative Paints
The company kamel rang shakiba With the aim of producing paints and industrial coatings, automotive, marine, traffic, construction, flooring and 22 km thinner in 1371 in Karaj Special Road, Tehran Province, established with the authorization of the industry The directors’ vision and belief in the collective wisdom and Undergraduate work and taking advantage of laboratory facilities Efficient use of expert help and technical knowledge to produce And offers a variety of colors in various fields.
Working policies Increasing technology worldwide and the necessity to be competitive in this area have obliged us that research, innovation, creativity and strengthening and upgrading quality control to be our main goals and we be able to reach international technical and economic alignment with long-term planning and policy-making. In this regard receiving three ISO 9001, ISO 9002 and HSe standard certificates of quality management for oil and gas and petrochemical industries indicates to the company’s strong determination to reach more promotion and also reliance to enhance its knowledge and quality management system’s maintenance and improvement. It is evident that in order to cope with customers’ increasing expectation these goals will be reviewed. CEO