Chameleon Paint

Manufacture of Industrial, Protective, Marine Traffic, Automotive & Decorative Paints

364 247 92-4
Product Group :Industrial Paint
Alkyd Bitumen Paint
This is an alkyd paint which is modified by bitumen and totally has general properties of alkyd paint such ...

This is an alkyd paint which is modified by bitumen and totally has general properties of alkyd paint such as proper coverage, high resistance to atmospheric condition, short dry time and good adhesion on steel structure. This product usually applied as a single layer to protect metal surfaces in indoor condition or surfaces which are not contact to direct sun light for long time. It can be use to concrete surface too.

Social Sharing

Share on facebook
Share on twitter
Share on linkedin
Share on email
Share on telegram
Share on whatsapp

• The surface should be free from any rust, moisture, mill scale, oil and grease.

• If the surface is smooth, it should rub by sand paper.

• Mechanical and chemical surface preparation methods should be performed depending on the type of contamination, the coating system, environmental condition and service life.

• The damaged area of primer and subsequent layer should repair.

• Apply the paint immediately followed by surface preparation.


• Flush equipment with cleaner before use

• Stir paint with a power mixer

• Use Shakiba’s thinner for adjusting the viscosity

• The thinner should be added gradually

• The consumption depends on temperature and type of equipment and thickness paint

• Clean all equipment with Shakiba’s thinner


• This product is flammable it must be kept away from heat, flash & flame

• keep container closed use with adequate ventilation & Earth

• Prolonged & repeated contact with skin may be harmful

• In case of eye contact flush with plenty of water and check with a medical doctor.


• Density , solid contents theoretical coverage are dependent on color

• Pot life, drying time is dependent on air and steel temperature, applied film thickness.

• Never apply coatings under environmental condition.

• Adjusting the viscosity & pressure. For better adhesion on un steel, we offer wash primer as on under.

• This information given 25°C temperature and changed temperature cause to change data.

• Don’t use different thinner; otherwise we decline all responsibilities of it.

• For more information, please call to sale engineering expert.

Product Quality Grade
Industrial Paint

For more information about this product, you can download the related PDF file from the link below.