Chameleon Paint

Manufacture of Industrial, Protective, Marine Traffic, Automotive & Decorative Paints

364 247 92-4
Product Group :Industrial Paint
High Build Epoxy Polyamide Thixotropic
This paint a two component anti - corrosive topcoat with high thickness. It is produced by epoxy resin, ...

This paint a two component anti – corrosive topcoat with high thickness. It is produced by epoxy resin, polyamide hardener & untoxic pigments. This paint has high adhesion with mechanical & chemical resistivity it has thixotropic property & Item be used by airless without thinner & it can be created 300-500 microns thickness with just one coating   This thixotropic paint will be creating a smooth level on the interior surface of tubes; as a result it can be prevented to pressure down. It can be used for industrial and food tankers, marine tankers, concrete & metal tanks, Gas and water tubes.

Social Sharing

Share on facebook
Share on twitter
Share on linkedin
Share on email
Share on telegram
Share on whatsapp

• The surface should be free form any rust, moisture, mill scale, oil & grease

• Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life

• For ferrous & Steel use blast in accordance with sa2 or sa2 ½ & remove all the abrasive residues & dust from the surface after sandblasting.

• Apply the paint immediately followed by surface preparation


• Flush equipment with recommended cleaner before use

• Stir component A (base) with a Power Mixer.

• Add hardener to base in the proper Mixing continue stirring for 5-10 Minutes.

• after 20 – 30 minutes ready to use.

• Use Shakiba’s thinner for the cleaner


• This product is flammable it must be kept away from heat, flash & flame

• Keep container closed use with adequate ventilation & Earth

• Prolonged & repeated contact with skin may be harmful

• In case of eye contact flush with plenty of water and check with a medical doctor.


• Pot life, drying time is dependent on air and steel temperature, applied film thickness.

• Never apply coatings under environmental condition.

• Adjusting the viscosity & pressure. For better adhesion on un steel, we offer wash primer as on under.

• This information given 25°C temperature and changed temperature cause to change data.

• Don’t use different thinner; otherwise we decline all responsibilities of it.

• For more information, please call to sale engineering expert.

Product Quality Grade
Industrial Paint

For more information about this product, you can download the related PDF file from the link below.