Chameleon Paint

Manufacture of Industrial, Protective, Marine Traffic, Automotive & Decorative Paints

364 247 92-4
Product Group :Industrial Paint
Wash Primer
Wash primer is a two component coating. It is used as a pre- treatment coating on clean and unpainted ...

Wash primer is a two component coating. It is used as a pre- treatment coating on clean and unpainted ferrous & non- ferrous substrates such as aluminum, copper, tin, cadmium, zinc. brass & galvanized steel. Prior to applying the new coating system in order to increase adhesion and corrosion resistance. As a result, we offer wash primer as connection factor between paint and surface and it can also be used as an under coat.

Social Sharing

Share on facebook
Share on twitter
Share on linkedin
Share on email
Share on telegram
Share on whatsapp

• The surface should be free form any rust, moisture, mill scale, oil & grease

• Mechanical & chemical surface preparation methods should be performed depending on the type of contamination, the coating system environ mental condition & the service life

• Apply the paint immediately followed by surface preparation .


• Flush equipment with recommended cleaner before use – Stir component A (base) with a Power Mixer.

• Add hardener to base in the proper Mixing continue stirring for 20-30 Minutes.

• After 30 minutes add Shakiba’s Thinner until color change from yellow to yellow green, then wash primer is ready to use.

• Use Shakiba’s thinner for adjusting the viscosity.

• The con summation depends on temperature & type of equipment & thickness paint .


• This product is flammable it must be kept away from heat, flash & flame

• Keep container closed use with adequate ventilation & Earth

• Prolonged & repeated contact with skin may be harmful

• In case of eye contact flush with plenty of water and check with a medical doctor.


• Pot life, drying time is dependent on air and steel temperature, applied film thickness.

• Never apply coatings under environmental condition.

• Adjusting the viscosity & pressure.

• This information given 25°C temperature and changed temperature cause to change data.

• Don’t use different thinner; otherwise we decline all responsibilities of it.

• For more information, please call to sale engineering expert .

Product Quality Grade
Industrial Paint

For more information about this product, you can download the related PDF file from the link below.